SecurityMan DVR-04 Guía de instalación descargar pdf (Pagina 58)

Chapter 3: First-Time NT500 Offline System Installation & Setup

3 – 40

Notes 3 Select a Privilege Template from the drop-down list:

■ No privileges

■ Guest Administrator

■ Guest

■ Monitor

■ Guard

■ Manager

■ Security Manager

■ Operator

■ Supervisor

■ Installer

Note: If specifying an installer or supervisor, system customi-

zation is only allowed if installer/supervisor privileges are

given to all organizational units.

4 Repeat steps 1 through 6 for each organizational unit (No

privilege is the default).

Configuring a lock using a laptop

The lock can be configured using a laptop or PDA. See the

NT500 Transport Guide for detailed instructions regarding use

of a PDA and NT500 Transport software. To configure a lock

using a laptop, use the following steps.

To connect to a lock using Stanley NT500 Software, the fol-

lowing items are necessary:

■ Laptop running Stanley NT500, with a serial port or a USB

to serial cable

■ Null modem adapter

■ Programming cable for connecting NT500 Locks to the

serial port or serial cable (BEST part number C63290)

■ Temporary operator card for NT500 Locks (provided with

the locks).

To connect the laptop to the lock

1 If your laptop does not have a serial port, connect a USB to

serial cable to the USB port on the laptop.

2 Connect the programming cable to the serial port or serial

cable.

3 Connect the programming cable to the lock's

communication port. The connector snaps in place.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 73 74

Sin comentarios

SecurityMan DVR-04 Guía de instalación Pagina 58