SecurityMan DVR-04 Guía de instalación descargar pdf (Pagina 47)

Chapter 3: First-Time NT500 Offline System Installation & Setup

3 – 29

Notes

Adding a channel

A door channel is the connection between a door and a con-

troller. A channels must be associated with a controller such

as the AC301 and AC512 controllers described above. Chan-

nels are required and provide a way to organize groups of

doors to allow for ease of programming.

To add a channel

1 From the Explorer Bar’s Navigator tab, click the Hardware

icon.

2 From the main menu click New > Create New Channel.

The Channel details window appears.

3 In the Name field, enter a name for the Channel.

4 In the Description field, enter a description of the Channel.

5 The Channel Type field should read Offline.

6 The Protocol Type field should read AC300/500 Series

RS232.

These two fields are not editable in offline mode.

7 Use the drop-down list to select the appropriate time zone.

8 Click Add.

Once a channel has been created, it can be assigned to a con-

troller. The channel is the mechanism through which doors

are then assigned to a controller.

To assign a controller to a channel

1 If not already viewing hardware, from the Explorer Bar's

Navigator tab, click the Hardware icon.

Connected, configured, and unconfigured controllers as

well as defined channels appear in the window.

2 To assign a controller to a channel, the controller icon can

be dragged and dropped onto the channel icon.

a) Click on the controller icon for the controller to be

assigned to a channel.

b) Holding down the left mouse button drag the icon to the

left side of the window where channels icons are dis-

played.

c) Once the controller icon is situated over the channel

icon release the left mouse button.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 73 74

Sin comentarios

SecurityMan DVR-04 Guía de instalación Pagina 47