SecurityMan AIR-ALARM II SERIES Manual de usuario descargar pdf (Pagina 19)

Functions/Features:

Nice, exquisite and weatherproof.•

Micro-computer controller, steady performance and quality.•

Study up to 10 pieces to a host.•

Built - in rechargeable battery for backup, automatic switches between AC powers to DC power in cases of emergency outage.•

Low standby power consumption, low battery voltage LED detection, resumes charging automatically.•

Wall mount installation•

Specications:

Operating power: 110~240VAC_50Hz•

Static power consumption: ≤40 mA•

Working power consumption: ≤450 mA•

The maximum alarm sound duration with flash: 3 Minutes•

Receiving distance: ≥300ft (in open area)•

Built-in Rechargeable battery 6VDC 1300mA (up to 100 hours stand-by) •

Alarm Siren Sound ≥120dB•

IP51•

Installation and usage

Plug in the AC power to an outlet; press the green button to enable the backup battery located on the back side of the outdoor siren. •

Study the siren to the alarm host according to the activation and deactivation instructions below.•

Unplug the siren from the AC power plug after you finish studying and find a proper location (Outdoor/indoor) to mount it , then plug in the •

AC power.

The alarm sound and red LED flash lasts up to 3 minutes if the alarm host is not disarmed within the 3 minutes. •

When the backup battery has a voltage that is equal to or less than 5VDC, the charging indicator (solid red) light will come on to represent •

charging status. The rechargeable battery takes approximately 20 hours to be fully charged and then the charging indicator light will turn

off.

Activating and deactivating Outdoor Siren

To Activate:

Siren: Connect the siren to an AC power outlet > press the red Study button located on the back of the siren > the red siren lights will •

turn ON.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sin comentarios

SecurityMan AIR-ALARM II SERIES Manual de usuario Pagina 19