SecurityMan LCDDVR4 Manual de usuario descargar pdf (Pagina 40)

SCREEN

In the main Setup menu browse down to Screen and press Select/Enter using

the front panel, RC or left mouse click to access the Screen setup menu as

illustrated below. The Screen setup menu can be use to congure Border, Auto

Sequence, and Video Adjustment.

BORDER

On the Screen setup menu, select Border. The Border conguration when turn

ON (system default) will divide the quadrant with a gray cross between the four

channels. This helps to distinguish the border line for each channel. Border

can also be set to OFF; this will disable the gray cross border between the four

channels or borderless display.

AUTO SEQUENCE

In the Screen setup menu, select Auto Sequence. The Auto Sequence is

use to setup Sequential time intervals which value can be set to OFF (Default

setting), and from 1 second up to 10 seconds. To enable auto sequence set the

dwell time between cameras to a desire time intervals and then Exit & Save

Changes. The

icon will display in lower left hand corner of the user inter-

face screen to indicate Auto Sequence is active and the channel will display in

single full screen. For example, if the sequential time is set to 3 seconds, the

camera will display for 3 seconds and then loop to the next camera is sequential

order. However; if the camera is not connected or not installed, the Auto Se-

quence will automatically skip over those inactive channel(s).

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 77 78

Sin comentarios

SecurityMan LCDDVR4 Manual de usuario Pagina 40