SecurityMan DVR-04 Manual de usuario descargar pdf (Pagina 24)

Digia II

User Manual

Network

The Network submenu has three of its own submenus. They are Network configuration, Network email, and

Network DDNS.

Network configuration

Figure 10 shows the Network configuration submenu.

Figure 10. Network configuration

Table 6. Network configuration submenu

Menu item Description

Data port Default is 00554.

HTTP port Default is 00080.

Control port Default is 01600.

Client access Check this box if you want to enable access to the Digia II over a network.

Bandwidth saving Default is 8192 KB. Select between 10 and 8192 KB. This limits the

bandwidth for the network stream.

Network type Choose between Static and DHCP. DHCP will assign values to the IP,

subnet, gateway, and DNS server values automatically.

IP The IP address of the unit. If you choose static as a network type, you can

set the IP address by highlighting the number you want to change, hit

Enter, and then use the up and down arrow to change the values. Hit

Enter again to set the number, then use the left or right arrows to move to

another position and repeat to change that number.

Subnet mask The subnet mask of the unit. If you choose static as a network type, you

can set the subnet mask the same way as you set the IP address.

Digia II Menu - Network

<< Network Configuration >>

Data Port

HTTP Port

Control Port

Client Access

Bandwidth Saving

Network type

IP Address

Subnet Mask

Gateway

DNS Server

00554

00080

01600

8192

DHCP

000.000.000.000

168.095.001.001

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Comentarios a estos manuales

Sin comentarios

SecurityMan DVR-04 Manual de usuario Pagina 24

Comentarios a estos manuales