SecurityMan DVR-04 Manual de usuario descargar pdf (Pagina 13)

5.15 Motion setup

The first step is to setup video record method by Motion Triggered. Please refer back to 5.7 Record

Schedule.

After the “MOTION SET” step is completed, press “ Menu” to exit, and press [ Record ]

to start the Motion Record feature.

5.16 NTSC/PAL Output Select

Before turning on the DVR, make sure the J10 jumper is on the NTSC setting (for U.S.A) or PAL set-

ting (for Europe).

5.17 Restart

There are two restart modes. First, use the Power Switch to restart the DVR;

second, press the PAUSE key continuously for 12 seconds, it will be hot restarted.

MOT LEVER:

User can press “ Select” to adjust sensitivity grade

of motion detection.

High(1----------10)Low

MOT REC TIME

This number indicates the recording time duration

when motion is detected. Press “ Select” to set the

time.

Time Set:5sec~30sec

MOTION SET

MOT LEVEL 5

MOT REC TIME 25

DVR Setup

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sin comentarios

SecurityMan DVR-04 Manual de usuario Pagina 13